20 oz Tumbler Heat Press Attachment for 110 V Mug Press Sublimation Machine

Mug Press Heat Transfer Attachment Heating Element for Heat Press Machine Voltage: The voltage of the heating transfer pad is 110V, our hole spacing is 8cm/3.14 inches, and the machine specifications of each manufacturer are different. Our accessory is 20 oz and 30 oz, which are fixed size. Depending on the machine’s hole spacing, the holes can be drilled using a screwdriver. Easy to operate: 1. Select or design the image and clean the surface of the cup. 2. Wrap the cup with the image so that the image is centered and symmetrical on both sides. Stick to the paper with thermal tape. 3. Place the cup in the center of the heating pad. 4. Adjust the pressure ball of the print cup, not too tight or too loose, and then close the handle. 5. Turn on the power, adjust the instrument time about for 200S to 300S, the temperature is about 180 to 200 degrees Celsius. 6. Press the timing button to stop when the countdown ends. 7. Remove the cup and peel off the paper, and the beautiful cup you made is finished. Specification: Material: iron sheet and silica gel Size: approx 8.3 x 9.8 inches/ 21 x 25 cm; 10 x 9.2 inches / 27 x 23.5 cm Capacity: 20 oz/ 30 oz Warm note: Please note, this heat press transfer machine is not suitable for minors to use or food processing. Please make sure there will be a mug in the heating element when you turn on power. Manual measurement, please allow slight errors on size. The color may exist slight difference due to different screen displays. Full printing requires turning the cup half a circle and printing again Brand: YLBFJXK Manufacturer Part Number: 920